I am thnking of getting some 22" wheels for my 08 titan.. but before i purchase the wheels i have a question...
this vehicle is equiped with tps (tire presure sensor) thingy... will i have to get these sensors for my new wheels?
i do not want the light to come on.

for those that have aftermarket wheels... what did you do?

no, you can retain the TPMS sensors from the stock wheels and have them installed onto the new wheels. so long as the tire engineer/tech doesn't break them. as the machines they use sometimes can bust the stems off. you'll need to make it a point that you have the sensors and that they need to be careful. now, this is rare but there have been some wheels that have the valve stem hole in an angle to wear the tpms sensor would not fit so just so you know that may be an issue. if the light comes on after having the tpms sensors removed and relocated there is a reset fix for it, but i highly doubt you will have a problem. good luck.

here's a pic of another so-cal titan owner with some nice black Hoss's in 22s: Bling/Rubber Specs: 22" XD HOSS/ 325/50/22 Nitto Terra Grapplers

__________________
PRGbuilt
born 12/3, purchased 1/4 '04 Smoke SE KC PRG MT kit, CST spindles, PRG Spec'd SAWs 2.5" C/Os w/Eibachs, SAW Airbumps, CST carrier bearing, 37x12.5x17 Pro Comp Extreme All-Terrains, American Racing Mojave Teflons, HID low beams, Magnaflow custom exhaust, Injen CAI Filter, ID FRP prerunner fenders, front windshield tinted, Optima Yellow Top, Pioneer AVH-4100DVD w/ipod adapter connected to 80gb iPod, Sirius, HD radio tuner, Hertz 6.5" Components front, Boston 6.5" rear, Boston G1 10" subs, tech12 sub enclosure, Alpine amps, Eclipse BEC106 backup camera, TrueTrac, regeared from 2.94s to 4.11s, CTW TT prerunner fiberglass bedsides, Giant Motorsports under axle conversion kit w/64" deavers (21" rear travel) with Giant custom built rear bedcage and KING 3.0 bypass shocks...

VIDS!!! http://vimeo.com/groups/h00ligan/videos

thanks for the info..

so then i need to use the sensors?

yes, there's no other way to get the light to turn off unless you disassemble your dash board and pull the led bulb out. you will need your tpms sensors. i don't have my sensors in and just leave the light on all the time. i'm used to it after 3 years of not having it turn off.

__________________
PRGbuilt
born 12/3, purchased 1/4 '04 Smoke SE KC PRG MT kit, CST spindles, PRG Spec'd SAWs 2.5" C/Os w/Eibachs, SAW Airbumps, CST carrier bearing, 37x12.5x17 Pro Comp Extreme All-Terrains, American Racing Mojave Teflons, HID low beams, Magnaflow custom exhaust, Injen CAI Filter, ID FRP prerunner fenders, front windshield tinted, Optima Yellow Top, Pioneer AVH-4100DVD w/ipod adapter connected to 80gb iPod, Sirius, HD radio tuner, Hertz 6.5" Components front, Boston 6.5" rear, Boston G1 10" subs, tech12 sub enclosure, Alpine amps, Eclipse BEC106 backup camera, TrueTrac, regeared from 2.94s to 4.11s, CTW TT prerunner fiberglass bedsides, Giant Motorsports under axle conversion kit w/64" deavers (21" rear travel) with Giant custom built rear bedcage and KING 3.0 bypass shocks...

VIDS!!! http://vimeo.com/groups/h00ligan/videos