Well that's frick'n high! Take a look ... amazing.


I think I saw the guy that used to sell the bars for mounting 4 equally spaced off-road lights in the lower grill. I want one. Got to go look for a minute ... I think it was Rob Bigham, although he might have just been a customer of the guy.

it was Bigham but i don't think he used a bar plus that picture won't come up for a close up, i've tried to look. hehe! the link is messed up! but i want to stuff four lights down there too!

__________________
PRGbuilt
born 12/3, purchased 1/4 '04 Smoke SE KC PRG MT kit, CST spindles, PRG Spec'd SAWs 2.5" C/Os w/Eibachs, SAW Airbumps, CST carrier bearing, 37x12.5x17 Pro Comp Extreme All-Terrains, American Racing Mojave Teflons, HID low beams, Magnaflow custom exhaust, Injen CAI Filter, ID FRP prerunner fenders, front windshield tinted, Optima Yellow Top, Pioneer AVH-4100DVD w/ipod adapter connected to 80gb iPod, Sirius, HD radio tuner, Hertz 6.5" Components front, Boston 6.5" rear, Boston G1 10" subs, tech12 sub enclosure, Alpine amps, Eclipse BEC106 backup camera, TrueTrac, regeared from 2.94s to 4.11s, CTW TT prerunner fiberglass bedsides, Giant Motorsports under axle conversion kit w/64" deavers (21" rear travel) with Giant custom built rear bedcage and KING 3.0 bypass shocks...

VIDS!!! http://vimeo.com/groups/h00ligan/videos

By bar ... it doesn't show up much. It is flat stock with light holes equally spaced. If you just put the lights into the Titan's existing holes, (which the bar uses to mount to the Titan), the lights are grouped more in sets of two toward each outside edge, (not equal).

Like this w/Titan holes and no bar:
OO OO
Like this with the bar:
OOOO

*that's it! Greg was the first...bought a couple titans, became an enthusiast immediately and made sure we had a bunch of kicka$$ suspension components for them.......his dedication has earned everyone's loyalty (for the most part) causing others to become just a little bitter.........

Found a pic of the lights, can't see the bar but ...
Btw, he went by the name of BigT or similar on one of the forums, but something else on a different one.

Probably would be pretty easy to fabricate the bar out of flat stock, now that I think about it. Just need a tap that works with the light mounts or a way to countersink a recess for the lights' mounting nuts if the bar is drilled though.

Attached Thumbnails

   

yeah, that's the pic! i see exactly what you're saying with the grouping of the lights. i want mine exactly like BigHambone's too! Swarren, can you fab two? i don't have the time nor the tools or resources to make a tube, but if you do i'll pay for shipping!

__________________
PRGbuilt
born 12/3, purchased 1/4 '04 Smoke SE KC PRG MT kit, CST spindles, PRG Spec'd SAWs 2.5" C/Os w/Eibachs, SAW Airbumps, CST carrier bearing, 37x12.5x17 Pro Comp Extreme All-Terrains, American Racing Mojave Teflons, HID low beams, Magnaflow custom exhaust, Injen CAI Filter, ID FRP prerunner fenders, front windshield tinted, Optima Yellow Top, Pioneer AVH-4100DVD w/ipod adapter connected to 80gb iPod, Sirius, HD radio tuner, Hertz 6.5" Components front, Boston 6.5" rear, Boston G1 10" subs, tech12 sub enclosure, Alpine amps, Eclipse BEC106 backup camera, TrueTrac, regeared from 2.94s to 4.11s, CTW TT prerunner fiberglass bedsides, Giant Motorsports under axle conversion kit w/64" deavers (21" rear travel) with Giant custom built rear bedcage and KING 3.0 bypass shocks...

VIDS!!! http://vimeo.com/groups/h00ligan/videos

Maybe someone else here with metal working tools will step up to the plate. If I do end up doing it myself ... then I'll do a couple but they'll be ragged, and maybe dedicated to the cheap Pro-comp lights ???

that's fine, cause i was looking at just getting the cheap 130w ProComp lights too! 4 6" round ones in the bottom grill. ragged is cool with me!

__________________
PRGbuilt
born 12/3, purchased 1/4 '04 Smoke SE KC PRG MT kit, CST spindles, PRG Spec'd SAWs 2.5" C/Os w/Eibachs, SAW Airbumps, CST carrier bearing, 37x12.5x17 Pro Comp Extreme All-Terrains, American Racing Mojave Teflons, HID low beams, Magnaflow custom exhaust, Injen CAI Filter, ID FRP prerunner fenders, front windshield tinted, Optima Yellow Top, Pioneer AVH-4100DVD w/ipod adapter connected to 80gb iPod, Sirius, HD radio tuner, Hertz 6.5" Components front, Boston 6.5" rear, Boston G1 10" subs, tech12 sub enclosure, Alpine amps, Eclipse BEC106 backup camera, TrueTrac, regeared from 2.94s to 4.11s, CTW TT prerunner fiberglass bedsides, Giant Motorsports under axle conversion kit w/64" deavers (21" rear travel) with Giant custom built rear bedcage and KING 3.0 bypass shocks...

VIDS!!! http://vimeo.com/groups/h00ligan/videos

hahaha, one of the dudes, Kyle, is selling his NCD titan with the cantilever rear long travel for 40k! http://www.titantalk.com/forums/buy-...itan-sale.html

i would buy it for 30k, the truck is badass, then have PRG tweak it and improve it! LOL!!

__________________
PRGbuilt
born 12/3, purchased 1/4 '04 Smoke SE KC PRG MT kit, CST spindles, PRG Spec'd SAWs 2.5" C/Os w/Eibachs, SAW Airbumps, CST carrier bearing, 37x12.5x17 Pro Comp Extreme All-Terrains, American Racing Mojave Teflons, HID low beams, Magnaflow custom exhaust, Injen CAI Filter, ID FRP prerunner fenders, front windshield tinted, Optima Yellow Top, Pioneer AVH-4100DVD w/ipod adapter connected to 80gb iPod, Sirius, HD radio tuner, Hertz 6.5" Components front, Boston 6.5" rear, Boston G1 10" subs, tech12 sub enclosure, Alpine amps, Eclipse BEC106 backup camera, TrueTrac, regeared from 2.94s to 4.11s, CTW TT prerunner fiberglass bedsides, Giant Motorsports under axle conversion kit w/64" deavers (21" rear travel) with Giant custom built rear bedcage and KING 3.0 bypass shocks...

VIDS!!! http://vimeo.com/groups/h00ligan/videos

I prefer it when they look like this (•)(•)

__________________


"Market research has never created a great car, great cars are the product of passion."
- Angus MacKenzie