I just bought, second hand, a California Auto Performance Replacement for the upper and lower grilles.

Black powder-coated billet.

It didn't come with instructions and before I go tearing into it, I'm wondering if any of you folks have done this and still have a copy of the install instructions?

I'll wait a day or two and hope one of you comes through with instructions. I've also queried the company in hopes they might have a set of instructions.

TIA,

Red

__________________
2005 Titan KC SE, Helwig, True-Track, ARE MX Canopy

You need instructions on taking the upper grill off?

The four spots I marked with the red circle have little adapter clips in them. Turn them one half turn to release. It's all then gentle pressure, prying and patience to pull it off.

To reinstall, replace the little clips into the mounting spots, and press everything back together. You won't be able to do it with a screw driver.

I gave up trying to install my lower grill.... some people have been successful with zip ties, but I think I'd have to remove the bumper to do it properly.

Attached Thumbnails

 

__________________
05 KC SE Smoke
01 Suzuki 600 GSF
88 Fiero 2M4

Thanks Steves, I hope that I figure it out. I'd just like to have step-by-step to avoid breaking anything that is either expensive or hard to fix

Red

__________________
2005 Titan KC SE, Helwig, True-Track, ARE MX Canopy

Shifty put a Grill on his.

It's not really all that difficult.... everything is basically held together with snap clips....

__________________
05 KC SE Smoke
01 Suzuki 600 GSF
88 Fiero 2M4

I'm sure I can accomplish the change over. But you need to consider my background. I'm a machinist by training. I almost never did anything without drawings or plans. Seldom did my profession allow me to just "Wing it"

Red

__________________
2005 Titan KC SE, Helwig, True-Track, ARE MX Canopy

"Remove clip A, B, C and D from Grill 1. Pull forward carefully on remaing clips to remove grill"

__________________
05 KC SE Smoke
01 Suzuki 600 GSF
88 Fiero 2M4